The right ventricular outflow tract (RVOT) view is a cornerstone of fetal cardiac screening because it shows the right ventricle connecting to the main pulmonary artery, the pulmonic valve, and often the pulmonary artery bifurcation—structures that are essential for recognizing conotruncal anomalies and outflow obstruction. ISUOG and ASE both emphasize routine assessment of outflow-tract views, including RVOT.

​Why the RVOT view matters

A clean RVOT view helps you evaluate:

• Ventriculo-arterial connection: RV → main pulmonary artery (MPA)
• Pulmonary valve: opening, thickness, restriction
• MPA size and flow
• Branch PA bifurcation (often visible as you refine/sweep)

This is one of the key views used to screen for:

• Transposition of the great arteries (TGA) (outflows not crossing normally)
• Tetralogy of Fallot (TOF) (overriding aorta/RVOT obstruction)
• Pulmonary stenosis/atresia
• Truncus arteriosus / other conotruncal defects

​​RVOT acquisition from the 4-chamber view (sweep technique)

Step-by-step (4CH → RVOT):

• Start with a true 4-chamber view - LV and RV balanced, septum crisp, apex not truncated.
• Sweep/tilt the insonation plane slightly cephalad (toward the fetal head) - This “cranial sweep” is a standard technique to move from 4CH into the outflow tracts.
• Angle slightly anterior (think: toward the fetal sternum/right shoulder depending on lie) - You’re trying to bring the pulmonary valve and main pulmonary artery into plane.
• Fine rotate just a few degrees - Small rotation helps open the RVOT without jumping straight to 3VV/3VT.
​

Confirm you’re truly in RVOT - In a good RVOT view you should see:

• The right ventricle leading into the pulmonary valve
• The main pulmonary artery arising from the RV
• The MPA coursing anteriorly and typically showing early branching (as you optimize)

​RVOT acquisition from the short-axis (SAX) view

This approach is great when your 4CH sweep keeps “missing” the outflow, or when you want a more reproducible pathway.

Step-by-step (SAX → RVOT):

• Obtain a fetal cardiac short-axis plane - In general, SAX is achieved by scanning perpendicular to the long axis of the heart.
• Move to the “high” short-axis level (great vessel level) - As you slide/tilt superiorly, you move from ventricular SAX up toward the outflow/great vessel level (where RVOT/MPA is best appreciated).
• Center the pulmonary valve and main pulmonary artery - Your target is the pulmonary valve at the RV exit and the MPA just beyond it.
• Follow the MPA until you see bifurcation - A key RVOT feature is the ability to see the MPA continue toward branching (and in nearby planes, ductal continuity).

​LPA or Ductus? That is the question...

When you’re evaluating the pulmonary artery branches in the short-axis (SAX) view, one of the most common moments of hesitation is this:

“Am I looking at the left pulmonary artery… or did I just slide into the ductus?”

It’s a fair question—and a very normal one. The key is to stop thinking of these as two identical tubes and start thinking about where they go and how they behave.

Start with anatomy and direction - From the main pulmonary artery:

The left pulmonary artery (LPA) branches laterally toward the left lung. It stays within the pulmonary circulation and does not head straight into a systemic vessel.

The ductus arteriosus courses posteriorly and inferiorly, connecting the pulmonary artery to the descending aorta. It has a longer, more continuous “run” compared to a branch PA.

If the vessel looks like it’s heading off to the lung and disappearing laterally, you’re likely following the LPA. If it looks like it’s traveling away from the heart in a smooth arc toward the descending aorta, that’s the ductus.

Use size and appearance as supporting clues

The ductus arteriosus is typically larger and more dominant than the branch pulmonary arteries in the fetus.

The LPA is smaller and more branch-like, especially earlier in gestation. Size alone isn’t diagnostic—but it helps reinforce what direction and continuity are telling you.

Sweep intentionally, not randomly

A common pitfall is overshooting the branch level.

If you’re unsure:

• Sweep slightly caudal to re-center on the main pulmonary artery
• Then slowly sweep cranially again to rediscover the branches
• Avoid large jumps that take you straight into the ductal or three-vessel views

Small, controlled movements keep you oriented.

💡 If it connects to the descending aorta, it’s the ductus. If it heads toward the lung and branches, it’s the LPA.

Once you start following the vessel’s destination—not just its shape—this distinction becomes much easier and far more intuitive.
​

What “normal RVOT” should look like (how it feels when you’re in the right place)

When you’re truly in the RVOT, things start to line up and make sense. You should see the pulmonary valve opening easily, with thin, mobile leaflets—nothing stiff, domed, or restricted. It should look like it wants to open.

The main pulmonary artery should come directly off the right ventricle and course anteriorly in front of the aorta in this plane. If it looks like it’s sneaking behind or doesn’t clearly connect to the RV, pause and reassess your angle.

And here’s the reassurance check: when you capture the LVOT as well, the aorta and pulmonary artery should cross right at their origins. That normal crossover is one of the quickest ways to confirm you’re looking at the right outflow—and not mixing up vessels.

When all three of those pieces fall into place, you can be confident you’re truly in the RVOT.

​Color Doppler: confirm patency and direction (without killing your frame rate)

Once your grayscale RVOT looks solid, color Doppler is your reality check—but this is one of those moments where less is more. Keep the color box small and focused right over the pulmonary valve and proximal main pulmonary artery. A big box might feel safer, but it will tank your frame rate and make everything harder to interpret.

Set your color scale that matches fetal flow. Typically >50cm/s is needed for RVOT flow. However when evaluating the septum, a lower velocity scale is helpful. You’re not looking for adult-level velocities here—too high and you’ll miss important flow detail.

Now confirm the essentials:

• Antegrade flow RV → MPA
• Laminar flow in a normal RVOT
• Aliasing or turbulence that could suggest stenosis or obstruction

You’re simply confirming that blood is leaving the right ventricle the way it should. And remember, outflow tract views and great vessel views with color Doppler aren’t optional. They’re a routine and expected part of fetal cardiac screening and full fetal echocardiography documentation.

Pulmonary Artery, when size really matters...
When comparing the pulmonary artery (PA) and aorta (AO) in the fetus, it’s important to remember that the PA is normally equal to or slightly larger than the aorta. This makes sense physiologically—the right ventricle is the dominant ventricle in fetal circulation, and most of the cardiac output is directed through the pulmonary artery and ductus arteriosus.

If the PA appears significantly smaller than the AO, that should raise concern for RVOT obstruction, pulmonary stenosis, or conotruncal abnormalities. On the other hand, a markedly enlarged PA relative to the aorta can suggest increased pulmonary flow or downstream obstruction. Size comparisons are never interpreted in isolation, but they provide an important visual clue when evaluating fetal outflow tracts.

​If you can demonstrate: RV → pulmonary valve → main PA (± bifurcation), you have RVOT. Then pair it with LVOT to confirm normal crossover (one of the quickest sanity checks in fetal outflow evaluation)

​Curious about learning fetal echocardiography - our Fetal Echo Cross Training Course can get you there. We have a course option that might be just what you're looking for. Want to be sure it’s the right fit? The Fetal Echo Preview Access Pass lets you experience how we teach fetal cardiac imaging—before making a bigger investment.

👉 Try the Fetal Echo Preview Pass now or join us for upcoming Intro to Fetal Echo Hands On Training  Workshop!

Keep Scanning!
- Lara Williams, BS, ACS, RCCS, RDCS, RVT, RDMS, FASE

The left ventricular outflow tract (LVOT) view is one of the most critical components of a complete fetal echocardiogram. While it may look deceptively simple, this view plays a major role in confirming normal ventriculo-arterial connections, evaluating aortic valve anatomy and flow, and screening for some of the most serious congenital heart defects.

The LVOT view answers the question “Is blood leaving the left ventricle the right way?”

Why the LVOT View Is So Important
The LVOT view allows the sonographer to:

• Confirm continuity between the left ventricle and the ascending aorta
• Visualize aortic valve opening and alignment
• Evaluate outflow tract size and direction
• Detect abnormalities such as:
  • Aortic stenosis or atresia
  • Left ventricular outflow tract obstruction
  • Malalignment defects
  • Conotruncal anomalies (when paired with RVOT assessment)

Without a clearly obtained LVOT view, major structural heart disease can be missed—even when the four-chamber view appears normal.

Where to Start: The Four-Chamber View
Every good LVOT view begins with a true four-chamber view. Before sweeping:

• Ensure the interventricular septum is well aligned
• Identify the morphologic left ventricle (smooth endocardium, mitral valve insertion)
• Confirm proper cardiac axis and apex orientation

This serves as your anchor and reference point.

How to Obtain the LVOT View
From the four-chamber view:

1. Gently sweep or tilt the transducer cranially
   This movement follows the natural course of blood exiting the left ventricle toward the head.
2. Apply subtle rotation as needed
   Slight clockwise or counterclockwise rotation helps bring the ascending aorta fully into plane.
3. Watch for ventricular elongation
   The left ventricle will lengthen as it transitions into the outflow tract.
4. Identify the aortic valve
   The mitral valve view changes as the outflow tract opens and the aortic valve becomes the dominant structure.

A correct normal LVOT view shows the left ventricle opening directly into the ascending aorta, without interruption.

What does a Diagnostic LVOT View look like?
A technically adequate, normal LVOT view includes:

• Mitral–aortic alignment, showing anatomical fibrous continuity between the anterior mitral valve leaflet and the posterior aortic root
• Continuity of the Interventricular Septum (IVS) with the anterior aortic wall
• The aortic valve centered over the left ventricle
• The ascending aorta coursing anteriorly

Using Color Doppler in the LVOT
Once grayscale anatomy is optimized, color Doppler is essential. Color helps you:

• Confirm antegrade flow from LV to aorta
• Identify any flow acceleration or turbulence 
• Screen for aortic stenosis or obstruction

Use color scale PRF settings >50 cm/s and narrow the color box to maintain frame rate and resolution.

​Common Pitfalls to Avoid
Common challenges include:

• Mistaking the RVOT for the LVOT
• Over-rotation leading directly into the three-vessel view
• Oblique imaging that creates the illusion of septal defects
• Excessive depth or sector width reducing image quality

Small adjustments make a big difference—this is a finesse view, not a forceful one.

The Big Picture
The LVOT view is more than a checkbox—this imaging view allows for physiology and alignment assessment that connects structure with flow. When mastered, it becomes one of the most satisfying views in fetal echocardiography and a powerful tool for early diagnosis. For sonographers learning fetal echo or cross-training into fetal cardiac imaging, developing confidence with the LVOT view is a major milestone. 

Curious about learning fetal echocardiography - our Fetal Echo Cross Training Course can get you there. We have a course option that might be just what you're looking for. Want to be sure it’s the right fit? The Fetal Echo Preview Access Pass lets you experience how we teach fetal cardiac imaging—before making a bigger investment.

👉 Try the Fetal Echo Preview Pass Now!

Keep Scanning!
- Lara Williams, BS, ACS, RCCS, RDCS, RVT, RDMS, FASE